English 
Français 
Allemand 
Espagnol 
Italien 
Portugais 
Aluminium alloy junction boxes for zone 1, 2, 21, 22
SA, SAG
Out of stock
- Zone 1,2,21,22
- Degree of IP66 protection
- Aluminium alloy body and lid
- Silicone seal
- Stainless steel bolts and screws
- RAL 7035 polyester coating
- IK10 shock protection
Security policy 
Delivery policy 
The junction boxes of the SA, SAG series are mainly used as explosion proof boxes and/or to transport cables to the control rooms for analog or digital signals as well as for the control, monitoring and signaling associated with equipment such as engines, pumps … etc., or to provide physical readings such as flow, level, temperature, pressure, etc.
Construction
Low-copper aluminum alloy. Stainless steel bolts and screws. Silicone seal. Internal/external earth screws. Fixing legs. Polyester coating RAL 7035 (Ex e) or RAL 5015 (Ex i).
Data sheet
- Certification
- ATEX
Iecex - Suitable for
- Area 1/21
- Protection mode
- Ex
Ex e
Ex tb - Degree of protection
- IP66
- Choc resistance
- IK10
- Corrosion resistance
- Aluminium alloy tested by standards EN 60068-2-30 (hot/wet cycles) and EN 60068-2-11 (salt fog tests)
- Material
- Aluminium
- Frequency
- 50/60 Hz
- Rated current
- 312 A, 1 A for exec. Ex eb, 100 mA for exec. Ex ia, 10 A for exec. Ex eb, 100 mA for exec. Ex ia
- Terminal section
- 1.5 ÷ 300 mm2
- Gaskets
- Silicone acid/hydrocarbon and high temperatures resistant
- Bolts and screws
- Stainless steel Entries: 2 ISO M25 entries
- Mounting type
- Aluminium cast iron feet for M6 screws
