Concepteur de solutions ATEX et industrielles
Contact : +33 (0) 4 88 78 21 81

Ex-proof camera ExCam IPP1280

camera ATEX thermique

ExCam IPP1280

Thermal network camera

  • Certification for Hazardous Areas (ATEX & IECEx)
  • Ultra-Compact and Leightweight Sensor Unit in Combination with a Main Unit
  • Thermal Technology for Low False Alarm Rate
  • Single-Cable-Solution (PoE)
  • Protection Level of IP68/IP66 (IEC 60529)
  • Resolution thermal: 208×156
Datasheet : camera ExCam IPP1280

The ExCam IPP1280 is a thermal network camera for use in hazardous areas – offering all advantages of thermal detection. The ExCam IPP1280 is a modular Ex-Network-Camera. This means that it consists of two units: the ultra compact sensor unit (lens and image sensor) and the main unit (network, power and memory card slot). The ExCam series is certified according to European regulations (ATEX) as well as international ones (IECEx). These certificates and further documents can be found in the download area.

Technical specifications

EXPLOSION PROTECTION
Declaration of conformity: DIN EN/IEC/GOST … 60079-0, DIN EN/IEC/GOST … 60079-1, DIN EN/IEC/GOST … 60079-31
Ex- certificates Sensor Unit: TUEV-18-ATEX-8218X, IECEx-TUR-18.0023X
Ex- certificates Main Unit (for T08…-TD): TUEV-10-ATEX-7969X, IECEx-TUR-16.0025X, No. TC RU C-DE.AБ.61.B.00380/19
Ex- Marking Sensor Unit:
– Explosion protection (gas): II 2G Ex db IIC T6 Gb
– Explosion protection (dust): II 2D Ex tb IIIC T80°C Db
Ex- Marking Main Unit (T08…-TD):
– Explosion protection (gas): II 2G Ex d IIC T6 Gb
– Explosion protection (dust): II 2D Ex tb IIIC T80°C Db

MECHANICAL CHARACTERISTICS (CAM/TB)
Sensor Unit: Stainless Steel (AISI 316L/1.4404)
Main Unit: T08-…-TD: aluminium, kopper free and see water resistant / T08-…-P: polycarbonat
Protection level (cam/ExConnection Rail): IP68/IP66 (IEC/EN 60529)
Weight: Sensor Unit: 0.7 kg / Main Unit (T08-…-TD): 4 kg / Main Unit (T08-…-P): 0.72 kg

RANGE OF TEMPERATURE
Sensor Unit:
-30°C to +60°C
Main Unit: -20°C to +50°C

POWER SUPPLY
IEEE 802.3at Type 2 Class 4 (PoE+), typical:11W, max. 17.1W

CAMERA
Image sensor: Uncooled microbolometer
Resolutions: 208 x 156 p, image scalable up to 640 x 480

NETWORK
1/11000 s to 1/3 s (50 Hz), 1/11000 s to 1/4 s (60 Hz)
Network Security: Password protection, IP address filtering, HTTPS encryption, digest authentication, user access log
Supported protocols: IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/, v3(MIB-II), etc.

NOUS TROUVER

A2S (Advanced Safety Solutions) 350 Avenue JRGG de la Lauzière 31 Parc du Golf - CS 90519 13593 Aix en Provence Cedex 3

NOUS CONTACTER

Tél: +33 (0)4 88 78 21 81 Fax: +33 (0)4 42 16 35 09 E-mail : contact@a2s-antec.com
Contact par email
Formulaire de contact
Contact par téléphone
HAUT DE PAGE