Concepteur de solutions ATEX et industrielles
Contact : +33 (0) 4 88 78 21 81

TSDC-BTS Ex Temperature sensor and transmitter

capteur de température atex zone 1

TSDC Serie

Temperature switch for zone 1 / 21

  • Multiple sensors inside (RTD/PTC/NTC/BTS).
  • Main body enclosure in Stainless steel 1.4404 SUS316
  • Pipe and main body of one-time processing finished, with ultra-high resistance to pressure and sealing
  • Two sizes (Inside Dimension 35mm/65mm) Small size easy for installation
  • A variety of accessories, suitable for internal, external, surface mount
  • A variety of composite signal output
  • Integrated cable gland
  • 6 x 0.75 braid armored high thermal resistant silicone cable (or non-armored on demand)
  • 1.5, 2, 3 or 5 meter cable length available

TSDC-S Composite Temperature Detection & control Sensor | Switch is used in equipment, piping (liquid or gas) and special places temperature detection and control of the original, TSDC-S Temperature Sensor | Switch by the flameproof shell, sensors and high temperature cables.

TSDC-S have two sizes (Inside Dimension 35mm/65mm) can be application. The tube pipe and the main body of one-time processing finished, with good resistance to pressure and sealing (Max Presser is 120 Bar).

TSDC-S sensor combination can be selected according to customer requirements (need a certain number or long-term customers).

Specifications

Electrical data:

Power Supply BTS:
100 ~ 250 V AC ,50/60Hz, 2.5 A
24 V AC/DC, ±10% ,50/60Hz, 2 A
Nominal Response Temperature:
BTS – (55°C ~ 180°C)
RTD – (0°C ~ 150°C) AA Class
PTC – (70°C ~ 180°C)
NTC – (-50°C~180°C)
Cable: 6X0.75 Armored cable
Start Signal Input: No
Environment Humidity: > 95%
Relay Load: No
Maximum Current: 2A NO / 2,5A NC
Maximum Voltage: 250V AC / 30 V DC
Maximum Switching Capacity:
1250 VA, 150W @ NO
750 VA,30W @ NC
Minimum Load: 10 mA @ 5 V DC
Contact Material: Silver alloy
Reset the Alarm Status Button: No
Cable Length: 1.5,2,3,5,9 Meters
Installation Dimensions: 80mm(L) X 35mm(W) X 35mm(H)
Weight: 65/75 g (Without Cable)

Mechanical data:

Enclosure Material: Stainless steel (1.4404, Or SUS 316)
Color: Stainless steel
Cable: non-armored or 6X0.75 Armored cable
Ingress Protection:  IP 66
Contact Material: Silver alloy

Certificates:

QAN & QAR: DNV PPRESAFE
Certification Body: LCIE
Certification Number:
IECEx: IECEx LCIE 17.0027X
ATEX: LCIE 17 ATEX 3015 X
Certification Mark:
II 2 G Exd IIC T6 Gb
II 2 D Extb IIIC T 80°C
Ambient Temperature: -55°C Tamb +70°C
Certification Standards:
IEC: 60079-0 : 2011 Ed 6.0, 60079-1 :2014
Ed 7.0 , 60079-31:2013 Ed 2
EN: 60079-0:2012 + A11:2013, 60079-1:2014, 60079-2:2007, 60079-31:2014

NOUS TROUVER

A2S (Advanced Safety Solutions) 350 Avenue JRGG de la Lauzière 31 Parc du Golf - CS 90519 13593 Aix en Provence Cedex 3

NOUS CONTACTER

Tél: +33 (0)4 88 78 21 81 Fax: +33 (0)4 42 16 35 09 E-mail : contact@a2s-antec.com
Contact par email
Formulaire de contact
Contact par téléphone
HAUT DE PAGE